Boiler Quality Steel Sheets Plates Coils Suppliers
Boiler Quality Steel Sheets Plates Coils | ASTM A 516 /ASME SA 516 Grade 60 Boiler Quality Steel Sheets Plates | ASTM A 516 /ASME SA 516 Grade 70 Boiler Quality Steel Sheets Plates Coils | ASTM A 516 /ASME SA 516 Grade 55 Boiler Quality Steel Coils | ASTM A 516 Grade 65 Boiler Quality Steel Coils
ASTM A 516 /ASME SA 516 Grade 55 Boiler Quality Steel Sheets Plates Coils | ASTM A 516 /ASME SA 516 Grade 65 Boiler Quality Steel Sheets Plates Coils | ASME SA 516 Grade 65 Boiler Quality Steel Sheets Plates
The Boiler Quality Steel Steel Sheets Plates are generally utilized as a part of creation of boilers in commercial ventures. These hot moved Boiler Quality Steel Steel Plates are made accessible in assortment of evaluations and thickness and are created to a prevalent quality, pondered to hold out the inside weight in boilers and valves.
Surely understood for its differing qualities of utilization and life span, these standards meet the accurate prerequisites of the businesses. The substance of carbon in these high temperature steel plates are between 0.16 %-0.29 %. We additionally supply hydrogen prompted split safe steel in SA/A516 Grade 70 HIC. The steel grade offered by us serves as default material for weight vessel applications.
Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service to ASTM A 516/A 516M Standard
ASTM A 516 or ASME SA 516 evaluation is a standout amongst the most prevalent steel grades.
It is essentially expected for use in welded weight vessels where score sturdiness is important.These grades cover a scope of tough qualities from 55 - 90 MPa and this adaptability clarifies a great part of the particulars prominence.
For plates more slender than 40mm typically supply as rolled. Plates above 40mm thick are standardized. For A 516 evaluation 70, which is one of most famous steels, the ASME standard sythesis is as per the following (reliant on evaluation):
ASTM A516 Standard steel plates are intended for use in pressure vessels where increased strength is is important.
ASTM A516 Chemical Properties (Cast Analysis)
|C||Mn||P max||S max||Si max|
|t < 12.5
|12.5mm < t =50mm||50mm < t ≤ 100mm||100mm < t ≤ 200mm||t < 200
| t < 12.5
|A516 Grade 55||0.18||0.2||0.22||0.24||0.26||06-09||0.55-0.98||0.035||0.035||0.15-0.4|
|A516 Grade 60||0.21||0.23||0.25||0.27||0.27||06-09||0.85-1.2||0.035||0.035||0.15-0.4|
|A516 Grade 65||0.24||0.26||0.28||0.29||0.29||0.85-1.2||0.85-1.2||0.035||0.035||0.15-0.4|
|A516 Grade 70||0.27||0.28||0.3||0.31||0.31||0.85-1.2||0.85-1.2||0.035||0.035||0.15-0.4|
ASTM A516 Mechanical Properties
|Tensile Strength (ksi)||Tensile Strength (MPa)||Yield Strength (ksi)||Yield Strength (MPa)||Elongation in 200mm(%)||Elongation in 50mm(%)|
|A516 Grade 55||55-75||380-515||30||205||23||27|
|A516 Grade 60||60-80||415-550||32||220||21||25|
|A516 Grade 65||65-85||450-585||35||240||19||23|
|A516 Grade 70||70-90||485-620||38||260||17||21|
ASTM A516 Mechanical Properties
When the thickness is less than 5/16 in(8mm), See Specification A20/A20M for elongation adjustment.
|from 5mm to 150mm||from 1,500mm to 2,500mm||from 6,000mm to 12,000mm|
Chemical Composition for Boiler Quality Steel Sheets Plates
|Carbon (max)||12.5 mm and under||0.27||A, B, C|
|over 12.5 to 50 mm||0.28||A, B, C|
|over 50 to 100 mm||0.30||A, B, C|
|over 100 mm||0.31||A, B, C|
|Manganese||0.85 - 1.20||A, C|
|0.79 - 1.30||B, C|
|Phosphorus (max)||0.025||A, B|
|Sulphur (max)||0.025||A, B|
|Silicon||0.15 - 0.40||A|
|0.13 - 0.45||B|
A - heat analysis, B - product analysis, C - For each reduction of 0.01% below the specified maximum for Carbon, an increase ofï¿½0.06% above the specified maximum for Manganese isï¿½permitted, up to a maximum of 1.50% by heat analysis and 1.60% by product analysis.
- Variety of plate widths
- Extensive range of thicknesses
- Quick turnaround
- Longer life
- Anti corrosive
- Pressure vessels
- Gas turbines manufacturing
- Heat exchangers, spheres, compressors and storage tanks manufacturing